Use a Pneumatic Forklift
You could normally find pneumatic forklifts in shipping and warehouse operations. Also known as pallet trucks or pump trucks, they are utilized to move supplies and things around on wooden pallets using metal forks mounted on a wheeled counterweight. The counterweight includes a pump which can raise the forks off the ground. A pallet truck is intended to be operated by one person.
Pallet trucks must be operated with care to avoid loss of control while lifting heavy loads. Machine must be inspected before operating. Clear the wheels area of any obstacle. Make certain that the handle turns smoothly. The pallet should be stacked carefully to guarantee that nothing would fall off during transportation.
On the end of the pallet truck's handle, squeeze the level located on the inside of the metal loop to be able to lower the forks and release the air in the pump. The forks could then be pushed into the slots of the pallet. The forks should be in the middle in order to ensure even distribution of the pallet's weight across them. Raise the forks from the ground by pumping the handle of the pneumatic lift until the pallet has completely cleared the ground. Do not lift the pallet very high or the forklift could unbalance.
Pull on the handle and then drag it behind you if you want to move the pallet. It is really not safe to push the pallet in front of you because the thrust can cause it to go out of control. Take turns slowly and don't attempt to stop suddenly. Slowly stop, squeeze the lever, and the forks will lower to the ground. Finally, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent location.