Most of the time, businesses will spend lots of money to purchase their lift trucks. It is vital, therefore to take proper care of your equipment to protect your investment into the long run. It is really a great idea to know the procedures which are undertaken in the maintenance and care of this piece of equipment.
Among the best ways to tell how good the engine is performing is by starting the lift truck up and listening carefully to see how it works. Like for instance, if there are any misses or knocks, the equipment is faulty and this must raise several concerns. Also listen carefully for any squealing noise that come from the belts as these sounds would provide you with a lot of information.
Several of the main parts requiring attention during maintenance include the gauges, horn, safety warning devices, the overhead guard and the lights. Any burnt out light bulbs or faulty components have to be replaced as soon as they are noticed. It is also essential to inspect the wiring.
The battery compartment terminals should be cleaned when the above parts have been inspected thoroughly. If the terminals are not clean, be sure to clean them well. Each battery cell should be checked in order to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the equipment and then change the filters. The hydraulic filter, the transmission filter and the fuel filters have to be frequently replaced. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
When the oil change has been carried out and new filters have been fitted, visually check the drive axle from underneath the machinery. Be sure to grease the axle if there is any grease fitting. Inspect the engine belts for any cracks or frays. If you find any, fix the problem accordingly. Next, inspect every other part of the equipment like the wheels. If any type of fault or concern is detected, be certain to address it immediately so as to make certain the machine is running at its safest and optimum levels.