Change a Propane Tank
Propane fueled forklifts are frequently utilized in warehouses. The lift truck is designed with the propane tank mounted at the back of the operator. The tanks, that look much like beer kegs, need to be replaced periodically as they have a limited lifespan. Operators of forklifts must utilize caution when handling propane tanks. Compressed gases are hazardous, particularly since the gas is flammable. Always utilize care when removing and replacing propane tank to avoid injury.
1 To change a propane tank, first stop the lift truck while leaving the engine running, and turn the valve on the tank off. Let the lift truck run until the engine dies. This process burns the gas off in the transfer hose which connects the tank and the engine. Before taking the second steps, put on the correct safety equipment, such as insulated gloves made of either neoprene or leather. It is vital for you to protect your skin from contact with the compressed gas, that is extremely cold.
2 The hose of the tank has to be disconnected, followed by removing the tank from its holding straps. When putting in a new tank, tighten the nut to reattach the holding straps and to reconnect the hose at the valve of the tank.
3 You could inspect for leaks by applying soapy water to the valve and slightly opening it. Leaking gas will cause bubbles to froth around the value. If this occurs, inspect the valve area and the connection hose at the nut. Re-tighten the connecting nut if you detect any leaks around the valve area, and after that perform the leak checking procedure over again. Persistent leaks mean that the connecting hose and nut must be replaced. However, if replacing the nut and hose still does not stop the leak, the tank should be replaced.
4 Open the valve all the way to allow the gas to fill the connecting hose. Then you could start the lift truck and continue operating.